MSG Equipment
Developer and manufacturer of diagnostic equipment for automotive components, providing solutions for workshops, industrial remanufacturers, and component manufacturers.
- +38 (057) 728-49-64
- sales@servicems.eu
- Mykoly Hrinchenka St.18
Kyiv, 03039
Ukraine
-
product
Controller for Diagnostics of EPS Racks, Pumps and Columns
MS561
Multifunctional equipment for testing EPS units. The device simulates real operation of a unit in a car, invented to diagnose pumps with electric power steering, it can be used jointly with hydraulic bench to test mechanical pumps, or separately from the bench to test electric part of a unit. The Controller tests EPS racks and columns directly in a car (if there is access to sockets) without dismounting of a unit. This method eliminates problems with wiring and other electronic units. The device has also OBD II connector for diagnostic scanner to detect errors. Besides diagnostics, the Controller contributes to more effective repair of a unit. The equipment can be placed on a table due to its small dimensions. Separate part of EPS unit can be connected to the device to analyze failures.
-
product
Test Bench for Power Steering Pumps
MS604
Test bench for diagnostics of single- and double-circuit pumps with mechanical drive. The test benchmeasures flow and pressure parameters under different speed. Besides, it detects such faults as leak, roar, body wear out, reducing valve sticking. It is an equipment of general service, used for work with power steering pumps of all types. The key features of the bench are easy operation and reliability.
-
product
Test bench for Diagnostics of Brake Valipers
MS300
Diagnostic equipment MS300 for repair and diagnostics of brake calipers. MS300 is manufactured fromanti-corrosion materials resistant to chemical effects of the brake fluid. The tabletop and the control panel are made of stainless steel, itensuresa long-lasting service of the equipment. A pressure indicator andhigh-pressure pumpcontrol elements are located on the control panel. There is also aconnection coupling fortested units. There is a gutter along the tabletops perimeter preventing the brake fluid from draining on the floor. For convenient use of tools, there is a section with perforation on the back side.
-
product
Test Bench for AC Compressors
MS111
The test bench is intended to test AC compressors of wide range of vehicles on R134a refrigerant. The equipment detects failures of a vehicle unit before its mounting in a car, whether it is a remanufactured, repaired unit or a used one. In the process of testing, data is shown on LCD display. It gives an opportunity to follow testing results realtime, save and/or print them due to software special features. Unit fixation mechanism is very flexible: a compressor can be easily fixed, no matter what kind of fittings it has. Units with electromagnetic clutch or electromagnetic valve can be tested both separately and simultaneously. Peculiar features of electric commutation are considered, connection polarity is identified automatically, indicator on the control panel indicates on presence of a diode in a circuit.
-
product
Equipment for EPS Units
Technologies are always in the state of progressive development. Today’s devices are replaced by tomorrow’s innovative and sensational machines. Motor car design is dynamically changing, cabin solutions sometimes astonish and look unrealistic. All these efforts are made to ensure drivers’ comfort, safety and style. Some improvements are being implemented in power steering as well.
-
product
Tester for Power Steering System
MS611
Tester for diagnostics of power steering system. The device is connected to a high-pressure line to measure performance of hydraulic system elements. The testing is carried out inside of a car without dismounting of units.
-
product
Tester for Alternator Stator Windings and Diode Bridges
MS014
The equipment combines two devices: tester of stator windings and diode bridges. The device has small dimensions and a light weight, it was developed according to the requirements of contemporary service stations.The feature of the handset tester is diagnostics of stator windings and diode bridges with no additional testing and measuring devices.Diagnostics of stator windings is carried out through automatic identification of phase connection, detecting winding integrity and measuring the difference in phase distortion.
-
product
Test Bench for Starters and Alternators
MS004 COM
Compact tabletest bench is used for quick and quality diagnostics of starters, alternators and voltage regulators without applying any additional measuring devices. The test bench possess high power, thus, units can be diagnosed under different loads. The equipment has small dimensions, it can be placed both in small service centers and big shops specialized in selling equipment.The bench includes the following diagnostic functions: testing of 12V and 24V alternators under load, 12V and 24V voltage regulators, 12V and 24V starters in idle running mode.Power supply is single-phase 220V, thus, there is no need industrial power supply.The device carries out testing of different alternators under load up to 100A.Connection of the 2nd battery is conducted from outside to the terminals on the bench body to achieve power supply of 24V for more convenient connection. Thus, usage of the 2nd battery is optional.New algorithms of testing have been implemented, meter accuracy has also been improved.
-
product
Tester for Voltage Regulators
MS012 COM
The device simulates installation of voltage regulator on faultless alternator in order to test its operating performance under different loads and modes, under various rotor resistance parameters. The handset tester conducts diagnostics of all existing types and models of voltage regulators.New types and models of voltage regulators can easily be added by updating software through USB-port. The equipmentis controlledby three encoders and a sensor on colored display. Diagnostics lasts about 2 minutes.
-
product
Vehicle Air Conditioning Service Equipment
As the scientific research of the world health organization has shown, the degree of concentration and the speed of reactions of the driver are significantly reduced under unfavorable climatic conditions in the car's interior. That is, the safety of passengers, to a certain extent, depends on the temperature in the individual zones inside the car and the appropriate work of the climate control system and the health of its individual units.
-
product
Flushing Stand for AC System
MS101P
Flushing stand for cleansing pipelines of air conditioning system from contamination.Flushing is conducted through forced circulation of flushing fluid in the closed circuit: car flushing stand. The equipment was designed according to the latest requirements of air conditioning system service centers. You will find a number of non-reacting (with pump and stand components) flushing fluids in the table 'TECHNICAL CHARACTERISTICS'.
-
product
Shock Absorber Test Rig
Defective shock absorbers impair the car's handling, unevenness on the road starts to be felt more strongly and the stability of the car at a high speed decreases. Check the shock absorbers visually, in motion, under load, and also in the service center on special equipment. In case of visual diagnostics, it is necessary to inspect the shock absorbers carefully, if there are signs of oil leakage on the body, this indicates a breach of the chamber tightness due to wear or damage to the glands and other sealing elements.
-
product
Flushing Stand for Power Steering System
MS603N
Test Bench for flushing of power steering system under pressure and diagnostics of power steering system units. The equipment measures power steering pump pressure under different speed; detects failures as leak, roar, body wear out, reducing valve sticking. The test bench measures power steering rack flow and pressure; detects failures as leak; wear out of seals, body and teflon rings. The equipment tests operation of units under different loads (in motion, parked). Top features of the equipment are small sizes, mobility, battery operation.
-
product
Shock Absorber Filling System
MS200
The system is used for filling mono-tube and twin-tube shock absorbers with gas after repair. MS200 has pressure adjustment function and is used for shock absorbers of power pressure up to 120 bar.
-
product
Starter and Alternator Test Benches
MSG Equipment team of professionals recommends you to carry out all repair operations in the car workshops without using your own hands. Self-repair often becomes the cause of chronic malfunction. Surely, you saw these grief-drivers who hang around day and night under the hood of their car. The desire to save on a trip to a service center by car turns into permanent breakdowns, rapid wear of parts and, consequently, frequent financial expenses.
