Filter Results By:
Products
Applications
Manufacturers
-
product
Electrical Tomography
POLARES32
By exploiting an innovative technology based on the use of Alternating Current (AC), the POLARES32 Electrical Tomography can measure and display all the survey parameters at the same time: ground resistivity values, current, voltage, spontaneous potential, induced polarization and indication the quality of the measurement.
-
product
Computerized Knife-Edge Tomography (CKET)
Many new generation lasers, having a spectrum which is out of the sensitivity response of typical camera detectors require different technologies to be ex-amined. Tomographic knife-edge technology offers a feasible solution. Multiple knife-edges scanning from different directions provide beam profiles depen-dent on scanning angle. By reconstruction techniques used in tomography, an image-like profile can be reconstructed and analyzed. Various detectors are used to provide a wide spectral range measurement capability
-
product
Cutting-edge 3D GPR array solution for efficient subsurface imaging cart solutions
Raptor
The Raptor system covers a wide range of applications and can be configurated with 450 MHz or 800 MHz antennas. Raptor 3D Arrays are based on Real-Time sampling (RTS) technology and the unique antenna design is a milestone in the evolution of the GPR. A Raptor Antenna can be arranged in different ways, which allows for both standard and more advanced GPR measurements. These include common mid-point (CMP), wide-angle reflection and refraction (WARR) and Tomography.
-
product
Electrical Resitivity Tomography System
WERT-60/120 2D
The resistivity/IP mainframe of WERT-60/120 2D Resistivity Tomography system designed the receiver and the transmitter in one unit, which support 1D Resistivity, 1D Induced Polarization VES survey and 2D electrical tomography survey;it features multiple functions, high accuracy, fast speed, high reliability and excellent expandability.
-
product
Optical Coherence Tomography Imaging Line Scan Cameras
OctoPlus Range
Teledyne e2v spent 2 years developing a CMOS sensor specifically for OCT. This resulted in the launch of OctoPlus, which has a specially designed pixel architecture that improves sensitivity and reduces signal roll-off to improve image quality by several dB vs state-of-the-art CMOS cameras, especially in deep structures.
-
product
White Light Continuum Generator
JIBE
A powerful coherent light source. Due to its amazing wide spectral band, the white light continuum is being applied in different areas such as optical parametric amplification, optical metrology, optical coherence tomography, materials characterization, etc.
-
product
OCT Imaging
Optical Coherence Tomography (OCT) imaging on the system, subsystem, and component level. Our drive for innovation is shaping our entire rapidly expanding product line. Complete SD-OCT systems are available that are out-of-the-box ready for biological, industrial, and research applications. In addition to our standard OCT systems, Thorlabs offers Doppler OCT extensions for specialized applications. For customers building or modifying their own system, a line of components that have been tested for use in OCT applications is available. In addition to the growing portfolio of standard OCT systems that we offer, Thorlabs is dedicated to providing OCT solutions to meet specific applications. Please contact us to discuss how our OCT technologies can be applied to meet your unique requirements.
-
product
Segmented STEM Detector
Opal
In a drive to meet our customers’ needs, El-Mul developed a detection solution for Scanning Transmission Electron Microscopes (STEM) which can support multiple applications such as DPC, cryo tomography, imaging of strain, charge, light elements or Z-contrast.
-
product
CT Inspection System
FF35 CT
The YXLON FF35 CT computed tomography system is designed to achieve extremely precise inspection results for a wide range of applications. Available in a single or dual tube configuration, it is perfect for very small to medium size parts inspection in the automotive, electronics, aviation, and material science industries.
-
product
Inline 3D-CT Automated X-ray Inspection Systems (3D-AXI)
3Xi Series
Saki's 3D-AXI (X-Ray) series adds significant inspection capability. The system utilizes Planar Computed Tomography (PCT) providing high precision CT imaging at high speed.
-
product
Computed Tomography and CT Scanner
When conventional x-ray images aren’t enough, a diagnosis for soft tissue conditions requires appropriate technology. Whether cross-sectional images are required or entire pictures of internal organs, CT exams and scanning are a vital part of a healthcare or imaging facility.
-
product
Resistivity Tomography System
WGMD-60 2D
WGMD-60 geo-electrical 2D electrical tomography device is the new developed two-dimention electrical resistivity imaging (ERT) system, which integrated electrode switching and 200v transmitting high power in the mainframe. It support max 60 electrode switching.The whole system features light weight and high stability. It widly applys for different resistivity mapping or geopysical surveys as landslide survey, groundwater investigation, enginnering exploration and so on.
-
product
Preclinical Imaging Modalities and Solutions
Bruker offers advanced preclinical imaging solutions for a broad spectrum of application fields, such as oncology, neurology, cardiology, inflammation, infectious diseases, cancer research, functional and anatomical neuroimaging, orthopedics, cardiac imaging and stroke models. Our range of techniques includes MRI (Magnetic Resonance Imaging) , PET (Positron Emission Tomography), SPECT (Single Photon Emission Computed Tomography) micro-CT (Micro Computed Tomography), optical imaging and magnetic particle (MPI) imaging.
-
product
Industrial Computed Tomography
TomoScope® L
High Accuracy Multisensor coordinate measuring machine for 3D measurements using the principle of Computed Tomography, in combination with additional sensors (tactile sensor systems, optical sensors)
-
product
Industrial Computed Tomography
TomoScope® XL
Micro focus X-ray source up to 225 kV (option: 300 kV micro focus tube) Grater range of x-ray detectors Grater range of x-ray detectors
-
product
Real Time DSP Software
ATS-GPU
ATS-GPU is a software framework developed by AlazarTech to allow users to do real-time signal processing using an Open CL compatible Graphical Processing Unit (GPU). Input to the GPU can either come from an AlazarTech PCI Express waveform digitizer or from user-supplied data. Fundamentally, ATS-GPU solves the problem of transferring data from a waveform digitizer to a GPU at very high speeds. A floating point FFT routine built into ATS-GPU has been benchmarked at 235,000 FFTs per second for 2048 points on one input. Ideal for Optical Coherence Tomography (SS-OCT). Benchmarks also showed that users can keep up with 500 MS/s sampling on one channel for 2048 point streaming FFTs.
-
product
Optical Modules And Components
Luna offers a complete line of high performance active and passive fiber optic modules and components for a wide range of fiber optic systems, including interferometric systems for fiber optics sensing, fiber optic gyroscope (FOG) and optical coherence tomography (OCT).
-
product
Resistivity Meter with Multi Electrode
POLARES
Till this moment the use of Electrical Resistivity Tomography (ERT) for geology has always been basically the same since its debut, based on the original vertical Electrical Soundings (VES) principles: applying a continuous current to two stakes inserted into the ground and measuring the corresponding voltage between other two. The applied current and thus the relative tension have always been continuous, with an inversion in polarity for each measure. The new tool POLARES uses an alternate current, instead, sinusoidal type, with an adjustable frequency.
-
product
Imaging Platform
TRITOM
The patented TriTom imaging platform is based on Photoacoustic Fluorescence Tomography (PAFT) technology that provides unparalleled capabilities for whole body imaging and in vivo characterization of small animal models.
-
product
Medical Imaging
ams offers high-speed, low-noise and low-power sensing solutions that enable manufacturers of Computer Tomography (CT) equipment and digital X-Ray Flat Panel Detectors (FPD) to produce crystal clear images while exposing patients to low doses of radiation. We are taking our leading imaging sensing solutions and expertise forward to achieve an unprecedented level of image accuracy while enhancing convenience and safety for the user.
-
product
Optical Coherence Tomography (OCT) systems
dOCTor™
dOCTor™ Optical Coherence Tomography (OCT) systemsoffer very high quality non-invasive tissue imaging in 2D and 3D. They are ideal for: In-Vivo Imaging Small Animal Imaging Tissue Engineering and Visualization Developmental BiologydOCTor systems are available in Swept-Source(SS) OCT and Time-Domain (TD) OCT configurations to satisfy different application imaging needs.
-
product
Micro-CT for material science
Micro computed tomography is X-ray imaging in 3D, by the same method used in hospital CT scans, but on a small scale with massively increased resolution. It really represents 3D microscopy, where very fine scale internal structure of objects is imaged non-destructively. Bruker microtomography is available in a range of easy-to-use desktop instruments, which generate 3D images of your sample’s morphology and internal microstructure with resolution down to the sub-micron level.
-
product
FLIM Upgrade Kits for LSMs
As technology leader in equipment and techniques for single photon counting, Becker & Hickl offers a wide range of high-grade Fluorescence Lifetime Imaging (FLIM) systems for laser scanning microscopes since 1998. Our techniques have found broad application within the scope of Life Sciences, Clinical FLIM, Diffuse Optical Tomography (DOT), Fluorescence Correlation (FCS, FCCS), Förster Resonance Energy Transfer (FRET) and more.
-
product
Industrial Computed Tomography
TomoScope® XS
Coordinate measuring machine for three-dimensional measurement utilizing computed tomographyFast measurement with high resolution via the next generation transmission tubeReduce measurement time by 90% with OnTheFly TechnologyLow operating costs as a result of the new monoblock designExtremely precise air bearing rotary axis for low measurement uncertaintyLow space requirement thanks to compact designLow weight allows for installation almost anywhereFast amortization through low acquisition costsStandard-compliant calibration for reliable and traceable measurement results, optionally with DAkkS certificateVersatile fields of application such as plastic, metal and multi-material componentsSoftware for 3D real-time reconstruction of workpiece geometries during tomography
-
product
Electrical Tomography Software
Res2dinv
This very popular software, developped by M.H.Loke, uses the method involving the Sasaki minimum squares inversion (1992) to produce a 2D sub-soil model starting from the data of apparent resistivity (up to 2000 electrodes). It is completely automatic and does not require that the user formulates a starting model. When using a state-of-art computer, the inversion of a single pseudosection will require only a few minutes.RES2DINV supports spreading types like Wenner, Schlumberger, Pole-Pole, Pole-Dipole, line Dipole, equatorial Dipole and other non-conventional spreading types.
-
product
X-ray Microscopy
ZEISS Xradia Versa
Extremely versatile ZEISS Xradia Versa 3D X-ray microscopes (XRM) provide superior 3D image quality and data for a wide range of materials and working environments. Xradia Versa XRM feature dual-stage magnification based on synchrotron-caliber optics and revolutionary RaaD™ (Resolution at a Distance) technology for high resolution even at large working distances, a vast improvement over traditional micro-computed tomography. Non-destructive imaging preserves and extends the use of your valuable sample, enabling 4D and in situ studies.
-
product
Neutronic Detection
Neutron imaging is a non-destructive method used to see inside objects that may be inpenetrable by X-ray or other techniques.Neutrons offer the benefit of being able to see through heavy metals such as lead but can also be used to examine delicate processes.Photonis Neutron detector is designed to provide either still images or video using both cold and thermal neutron imaging techniquesfor non-destructive testing and neutron tomography.
-
product
MXI Computerized Tomography (CT) Option
The Nordson TEST & INSPECTION µCT inspection option provides Computerized Tomography (CT) functionality to compliment the 2D X-ray investigations on Nordson TEST & INSPECTION X-ray inspection systems. It uses the superior, sub-micron feature recognition 2D x-ray images, that Nordson TEST & INSPECTION X-ray systems always provide, to produce the best CT models for 3D sample analysis, virtual micro-sectioning and internal dimensional measurements. It reduces the number of time-consuming micro-section analyses needed and / or assists in identifying where micro-section preparation and investigation must concentrate. Available with a system order or as retro-fit to suit application and workflow needs.
-
product
Industrial CT Scanning Services
Computed tomography (CT) is also referred to as industrial x ray and industrial imaging. It is an x-ray methodology yielding 3-dimensional (3D) results by placing an object on a rotational stage between an x-ray tube and x ray detector, rotating the object 360 degrees and capturing images at specific intervals—such as every degree or every half degree.
-
product
Micro-CT for Life Science
Micro computed tomography is X-ray imaging in 3D, by the same method used in hospital CT scans, but on a small scale with massively increased resolution. It really represents 3D microscopy, where very fine scale internal structure of objects is imaged non-destructively. Bruker microtomography is available in a range of easy-to-use desktop instruments, which generate 3D images of your sample’s morphology and internal microstructure with resolution down to the micron level.
