Filter Results By:
Products
Applications
Manufacturers
Flashover
unintended electrical discharge.
-
product
Cavium CN66xx Packet Processor AMC
AMC732
The AMC732 is a 10-Gigabit Ethernet (10GbE) AdvancedMC™ (AMC) module which includes an on-board multi-core packet processor based on Cavium CN66XX CPU. VadaTech offers this product in a mid size (full size optional) form factor with the AMC.1, AMC.2 and AMC.4 specification. The AMC732 is based around the Cavium OCTEON CN66xx processor which has been specifically designed to intelligently process Ethernet packets at line rate. The processor can be loaded via the PCIe/SRIO interface or via an optional flash memory. The number of processor cores, speed grade, and amount of DDR3 memory is customizable based on customer needs.The module has an RTC on board and 2GB of HFA for pattern matching for deep packet inspection, etc. The SDK for the processor as well as additional software stacks are available from Cavium or third party. The AMC732 has Serial Over LAN (SOL) with a true hardware Random Number Generator.
-
product
Data Loggers
The unit can acquire data from on-board interfaces at rates of up to 10 kilosamples per second, and from remote units via communications links. A high-performance on-board PowerPC microprocessor offering over 1000MIPS processing power hosts customer applications for real-time data analysis. Application code may be autocoded using our Graphical Development Environment (GDE) from Matlab/Simulink control modules. Data is logged to 2GB of on-board Flash memory and downloaded for analysis via a Gigabit Ethernet network connection.
-
product
Ensenso 3D Cameras
N Series
IDS Imaging Development Systems GmbH
The compact and robust aluminum housing of the camera with lockable GPIO connector for trigger and flash and GigE connector, has two monochrome CMOS sensors and a projector. The projector is available either with blue lights in the visible area or with infrared lights. Via Power over Ethernet a data transfer and power supply are possible with long cable lengths.
-
product
Manual Dielectric Constant, Tan Delta & Resistivity Test Set
*AC and DC test Voltages switched internally.*Direct digital display of test voltages.*Auto ranging and direct read out of volume resistivity.*Cell constant adjustment and Tan Delta zero correction.*Built-in protection for test sample flash over.
-
product
Peak Voltage Measurement
In high voltage measurement technology, the peak value, or the effective value, of the voltage is determined in accordance with VDE 0432 or IECV 60060. The peak voltage measuring device from MPS Mess- & Prüfsysteme GmbH can measure these two values in connection with a high voltage divider (capacitive or resistive). In the event of flashovers in the high-voltage circuit, this is indicated in the SMG.
-
product
Portable Stroboscopes
Monarch Instrument has been manufacturing Stroboscopes for visual inspection and speed measurement for over 35 years. We are recognized as the leading manufacturer of portable hand held stroboscopes. We have xenon flash tube and LED versions available in a variety of different models to suit your application requirements.
-
product
Surface Flash Tester
TF313
TESTEX Testing Equipment Systems Ltd.
Surface Flash Tester. The rapid spread of flame over the surface of the material without ignition of its basic structure, usually applied to pile or fur fabrics. This flammability tester is safe and easy to operate, Swivelling butane burner is traversed across the face of the fabric to determine whether surface flash occurs and to record any damage to the base fabric
-
product
Thermal Imaging Surveillance Cameras
Shenzhen Everbest Machinery Industry Co.,Ltd.
Visible light digital camera640x480 resolution with flash provides sharp images regardless of lighting conditionsPicture-in-pictureDisplays thermal image super-imposed over a digital imageLED flashlightAllows the visual camera and fusion to be used in poorly lit environmentsWide temperature range: -20 to 400°C targeting electrical and industrial applications±2% accuracy reliable temperature measurementThumbnail view: easy to view and analyze images quicklyThe image rotationThe ability to automatically rotate the active imageAudio recorded with the video imageA speaker to listen to audio recorded with the video imageCapacitive touchscreenMore easy, productive and effective to operate itLi-ion rechargeable batteryLasts >4hrs continuous use, replaceableCopy to USBEasy uploads images from camera to USB memory cardArea (minimum/maximum) modeShows the minimum or the maximumTemperature reading in the selected areaInside Memory 100M bytesData and Live video transform between camera and PC or smartphone
-
product
Cable Fault Locators
Cable Fault Locator is a device used for short circuit faults, cable cuts, resistive faults, intermittent faults, and sheath faults. Fiberinthebox supply cable fault locator for power cable, optical fiberal cable, etc. Fault Location in Power Cable is designed to locate cable faults, pinpointing the fault location, route tracing, cable identification, voltage withstand test and cable information management. It can locate all kinds of cable faults for all voltage level cables, including open circuit, short circuit, low insulation, high insulation and flashover faults, etc. Most power cables were buried underground, invisible, and out of reach, with modern new power cable fault locater, it can find the fault point quickly, solve problems immediately and restore power supply.
-
product
COM Express Type 10 Mini Module With Intel® Pentium® Processor N4200 & Celeron® Processor N3350
CEM311
The CEM311 is designed to support the Intel® Pentium® N4200 quad-core and Celeron® N3350 dual-core processors (codename: Apollo Lake). Integrated with Intel® Gen 9 graphics, the CEM311 with the support of DX12.0, OCL 2.0, OGL 4.3 delivers outstanding graphics computing, 4K resolutions and media performance. The rugged system on module supports a wide operating temperature range from -20°C to +70°C to ensure stable operation in harsh environments. The embedded platform offers onboard 4GB or 8GB of DDR3L memory and an optional eMMC flash up to 64GB. Overall, the CEM311 can be served as an excellent solution for graphics-intensive applications over the Industrial IoT, including industrial control, medical imaging, digital signage, gaming machines, military, and networking.
-
product
Power Cable Fault Locator
TM500
TM500 Power Cable Fault Locator adopts international advanced electronic testing technologies and SCM technology, and combines low-voltage pulse reflection and pulse current testing methods, is suitable for the precise range finding of power cable high resistance, flashover, disconnection, and low resistance. Low-voltage pulse reflection method applies to test the range of the low resistance and broken line, and the length and wave velocity of various cables. Pulse current testing method can be divided into breakthrough high-voltage flashover and DC high-voltage flashover for the high resistance and flashover cable fault finding.
-
product
Automated Programmer Superpro Sb05
※ Four Pick & Place nozzles, Eight socket pressing actuators and 2 tape feeders※ High throughput up to 2400UPH※ Embeded with eight ultra-high speed programmers SuperPro / 7500, each with up to 4 sockets, totally 32 sockets. Throughput 60 times higher than SuperPro / SB01 for eMMC devices※ Supports over 80,000 devices from over 300 IC manufacturers※ Supports tray, tape and tube input and output. Supports laser and ink marking※ Short change-over time※ Intelligent s/w cuts learning curve and setup time, makes task management an easy job※ Compact sizeHigh throughput：4 nozzles, 8 independent socket pressing actuators and 2 tape feeders. Up to 2400 UPH for devices with programming time less than 50 sec. Throughput 0.6 to 60 times higher than SuperPro/SB01, especially higher for large capacity devices like eMMC, NAND /NOR FLASH,SPI FLASH. Suitable for both small and large capacity devices. Prog. Time (S) 50 60 120 180 240 300 UPH (unit per hours) 1600 1600 840 560 420 336 Accurate positioning：Equipped with high performance servo system, precise CCD cameras and vision algorithm for device alignment and sockets / pick & place spots positioning.High performance programmers： 8 ultra-high speed universal gang programmers SuperPro/7500 resident. Each with up to 4 sockets, totally up to 32 sockets in the system. Supports up to 100,000 devices from over 300 IC manufacturers and growing.Varied I/O devices：Supports tray, tape and tube input and output. Supports laser and ink marking. Supports packing conversion and can work as a packing conversion machine alone.Short change-over time：I/O devices and socket adaptor are easy to be changed when programming task need to be changed. Socket positioning can be performed automatically. Projects can be loaded automatically with barcode scanning.Powerful and intelligent software：Setup data saved for next operation, log file and statistic reports for quality and yield traceability, flexible sockets prohibition strategy promises high yield rate for unattended operation, graphical user interface cuts learning curve, prevents chip over-lapping by socket checking before chip placing.Remote Control：Remote project loading, quality monitoring, volume control, file security.
-
product
Medical Withstand Voltage Tester
2670YM
Shenzhen Chuangxin Instruments Co., Ltd.
Medical Withstand Voltage Tester，2670Y Medical Withstand Voltage Tester Has All The Function Of The Conventional Withstand Pressure Tester,And Increasing The Arc(Flashover)Detection Function,It Can Test The "Flashover" Phenomenon Of Electrical Equipment Intuitively,Accurately,Rapidly And Reliably Through The External Oscilloscope,The Measured Electrical Equipment Without "Flashover" Phenomenon,
-
product
Pocket Autorange Multimeter
MT-1508
Comply with CE EN61010-1 CATIII 600V Safety rated.Comes with a backlight, 3 1/2 digits 1999 counts, great to understand reading.Auto range functions provide accurate, easy to use Display with backlight.Non contact ACV detectorPocket size design for easy carrying.Built-in LED flash light.Extra function: Auto power off, low batter indication, Data hold, Over range indication.
-
product
Fluorescence Spectrophotometry
Agilent’s fluorescence systems, built by a global leader in fluorescence technology and molecular spectroscopy, are used by labs all over the world. The unique Xenon flash lamp technology in our Cary Eclipse Spectrophotometer delivers superior flexibility and sensitivity, and is ideally suited for use with fiber optic technology and bio-sample analysis. The Cary Eclipse is a high-performance workhorse for your analytical needs, providing robust, consistent results in every application.
-
product
XMC Module
XMC-SoftDAC-32F
2µS settling time, 0-5V range• Six programmable output ranges perchannel• Up to 30mA output drive• Output Specification:o 16 bits settling time: 700ns (typ)o Low offset:125µV (typ)o Offset drift: 0.35µV/ºC (typ)• Unipolar mode: 0V to 5V, 0V to 10V• Bipolar mode: ±5V, ±10V, ±2.5V, –2.5Vto 7.5V, ±10 mA continuous, ±30 mA max• 1LSB max DNL and INL over the IndustrialTemperature Range• 1M words x 32 bits dynamically allocatable among channels• 500K samples/second throughput• Power-on reset to 0V• Flash RAM for configuration file• Two-stage buffers• Global output buffer with internal or external triggering• 4-user digital I/O (TTL levels, outputs: 48mA sinking, 12mA sourcing)• Optional A/D for reading back• Internal ±15V
-
product
Flash In Module
FIM Series
Axiomtek's FIM (Flash in Module) series is designed into ATA protocol type with compatible IDE standard interface based on flash memory technology. This flash module is offered with various capacities ranging from 128MB up to 4GB and can operate under industrial temperature range goes from -40°C~85°C in the harsh operating environments. The features of reliability, high performance, cost-effective and easy-to-integrate designs make FIM series a perfect solution over traditional storage devices.
-
product
Flash SATA DOM
FSD Series
Axiomteks FSD (Flash SATA DOM) series is designed into Serial ATA II protocol type with compatible Serial ATA standard interface based on flash memory technology. This flash module is offered with various capacities ranging from 128 MB up to 32 GB and can operate under industrial temperature range goes from -40°C ~ 85°C in the harsh operating environments. The features of reliability, high performance, cost-effective and easy-tointegrate designs make FSD series a perfect solution over traditional storage devices.
-
product
Brinell Optical Scope
HiLight Series
Newage Testing Instruments, Inc.
The Newage 5620 Series HiLight Brinell Optical Scopes features a high-efficiency LED array for its light source, providing excellent illumination and improved readability over conventional “flash light” scopes.
-
product
PMC Module
PMC-softDAC-xxF
2 µS settling time, 0-5v range• Six Programmable OutputRanges per channel• Up to 30ma Output Drive• Output Specification:o 16 Bits Settling time: 700ns (typ)o Low Offset:125µV(typ)o Offset Drift: 0.35 µV/ºC (typ)• Unipolar: 0V to 5V, 0V to 10V• Bipolar Mode: ±5V, ±10V,±2.5V,–2.5V to 7.5V, +-10 mAcontinous, +-30 mA max• 1LSB Max DNL and INL Over theIndustrial Temperature Range• 1 MWords x 32 bits dynamicallyallocatable between channels• 500 KSPS throughput• Power-On Reset to 0V• Flash ram for configuration file• Two stage buffers• Global output buffer w/ internal orexternal triggering• 4 User Digital I/O, (TTL levels,outputs: 48 mA sinking, 12 mAsourcing)• Optional A/D for reading back
-
product
PMC Module
PMC-softDAC
2 µS settling time, 0-5v range• Six Programmable OutputRanges per channel• Unipolar: 0V to 5V, 0V to 10V• Bipolar Mode: ±5V, ±10V,±2.5V,–2.5V to 7.5V• 1LSB Max DNL and INL Over theIndustrial Temperature Range• 64k DAC buffers• Power-On Reset to 0V• Flash ram for configuration file• Two stage buffers• Global output buffer w/ internal orexternal triggering
-
product
NumaView Software
Teledyne Advanced Pollution Instrumentation
NumaView™ Software provides sophisticated triggers for initiating data logging, including periodic and conditional. The data can be viewed directly on the display over a selected period of time. Results also can be downloaded onto a USB flash drive or via standard T Series I/O ports.
-
product
Solar Cell Tester
Jiangsu Keyland Laser Technology Co., Ltd.
Features:- Up to standard IEC60904 & JISC8933- 24 hrs continuous working , over 300,000 flash- Siemens PLC system adopted- 10 Parameters display
